TP-LINK Tapo T315 | Tapo Smart Temperature & Humidity Monitor | TAPO-T315
$25.00 inc. 9% GST
Smart Temperature & Humidity Monitor
- Real-Time & Accurate Monitoring – Detects real-time temperature and humidity with great accuracy. (Measurement Accuracy: ±0.54 ºF, ±3% RH).
- 2.7″ E-ink Display – Indicates temperature & humidity, comfort level with facial expressions, battery condition, and signal.
- Home Automation – Automatically turn on/off home electronics (e.g. heater, fan, humidifier and more) to maximize conform and save energy.
- Instant App Notification – Receive app alert notification when conditions fall outside preset range.
- Free Data Storage & Visual Graphs – Record temperature and humidity data and generate periodic data summary.
- Flexible Installation– Just place it on the desk or mount it on the wall.
- Hub Required – The Tapo Hub is requried to support smart features, like remote monitoring, home automation, data export and more.
2 in stock
Smart Temperature and Humidity Monitor
See Everything
at a Glance
Tapo T315
Works with Tapo Devices*
For Home Automation
2.7″ E-ink Display
High-Accuracy Sensor
Up to 2 Years
Battery Life
Instant App Notifications*
Free Storage & Export
2 Years Worth of Data
*Tapo Hub is required.
2.7″ E-ink Display, reads like real paper.
Look at this.
-
Reflective Display
Easy on the eyes.
Low-power consumption. -
Clear & Sharp
Large bold numbers is readable even from meters away.
-
Wide View Angle
Easy to read from almost any angle.
-
Glare-Free
No screen glare, even in bright sunlight.
High-Accuracy Sensor
The built-in Swiss-made sensor features a typical accuracy of ±3%RH, ±0.3°C / 0.54°F. By obtaining and updating data every 2 seconds, the sensor gives you accurate current information.
±3%RH
±0.3°C / ± 0.54ºF
Humidity Range: 0%~99%RH
Temperature Range: -20~60ºC / -4~140ºF
* The E-ink screen only displays temperature from 0 to 50°C (32 to 122°F). If the readings go beyond the display range, you can check the temperature on the Tapo app.
Instant App Alerts
Receive instant app notifications when temperature or humidity levels fall outside your customized ranges. React promptly to sudden air condition changes whenever the need arises.
Too Warm!
now
“Wine Cellar”: The temperature is higher than your preferred range at 11:30.
Maximize Comfort & Save Energy
The sensor automatically turns on/off appliances connected to Tapo devices, such as heaters, fans, and humidifiers, to adjust the comfort level in the room. It also helps to save on your energy bills.
Lower 16℃
Heater On
Higher 21℃
Heater Off
2-Year Data Storage & Export for Free
Understand your home environment with up to 2 years of cloud data logging and storage. Export all the data to a CSV file sent to your email to review at anytime.
Long-Lasting Performance
The Tapo Smart Temperature and Humidity Monitor uses two AAA batteries and lasts for up to 2 years.*
*Battery life of up to 2 years is based on TP-Link’s laboratory results under normal use. Actual battery life may vary depending on working conditions.
Switch display unit and position with ease.
Display as You Like
Press the side button once to switch the temperature unit. Double press to switch the display position of temperature and humidity.
Comfort Level Indicator
Keep an eye on your home’s comfort levels at a glance. You can also customize your comfort zones in the Tapo app.
Flexible Placement
Place your monitor anywhere in your home quick and easy. Sit it on a table or shelf, stick it to a wall with the included adhesive, or attach it to any metallic surface.
- Cigar Humidor
- Reptile Tank
- Green House
- Instruments
- Storeroom
- Baby Room
- Office
- Kitchen
All in One App
Experience your next-level smart home with the Tapo line all in a single app. Create a more secure, convenient, and comfortable living space for you and your loved ones.
Weight | 0.25 kg |
---|---|
Dimensions | 7.5 × 3.2 × 18.9 cm |
Related products
-
TP-Link TAPO L530E SMART BULB 16M COLORS | Tapo L530E
$29.90 inc. 9% GSTAdd to cartSmart Wi-Fi Light Bulb, Multicolor
Tapo L530E
- Multicolor – Easily design scenarios for your daily routine or activities by customizing brightness, light temperature, and colors–with 16,000,000 hues to choose from.
- 60-watt equivalent – LED bulb produces up to 806 lumens of white brightness and has a dimming range from 1% to 100%.
- Preset for Convenience – Found your favorite lighting for watching movies? Save it as a setting you can simply select for future movie nights.
- Schedule & Timer – Create schedules and count plans to turn on/off with the brightness/color you set.
- Sunrise and Sunset Modes – Automatically activate your light according to your time zone.
- No Hub Required – Connect the L530E light to your home wifi, then you are all set.
- Voice Control – Manage the lights with your voice commands as Tapo works with Amazon Alexa and Google Assistant.
- Remote Control – Take your phone out of your pocket and open the Tapo app to control your light remotely.
- Away Mode – Automatically simulate someone being at home to frighten away, unwanted visitors.
- Restore Last Light State – the bulb automatically returns to its previous power-off state.
-
TP-Link Smart Robot Vacuum Cleaner Sweep TAPO RV10 LITE
$259.00 inc. 9% GSTAdd to cartRobot Vacuum & Mop
- High-Efficiency Zigzag Path Planning?- Organizes a neat zigzag route to reduce missed or repeated areas compared with random-path robot vacuums.
- 4-Level Suction Modes?- 2000Pa Strong Suction. Easily clean pet hair, daily messes, and more.
- Vacuum and Mop Combo?- 3-level electronic mopping tackles sticky messes and kitchen grease for a more thorough clean.
- Simple Control via Tapo App?- Tailor scheduling and switch clean modes at home or away.
- 3-Hour Continuous Cleaning?- 2600mAh long-lasting battery to clean your whole home on a single charge.2
- Auto-Charging?- Returns to the charging dock automatically when the battery gets low, and then restarts right where it left off.
- Carpet Auto-Boost?- Increases the suction power when moving from a hard floor to a carpet.
- Voice Control?- Simply send voice commands via smart speakers.
-
TP-Link Tapo H100 Smart Hub with Chime | TAPO-H100
$29.00 inc. 9% GSTRead moreTapo Smart Hub with Chime
Tapo H100
- Reliable Long-Range Connections – Keep sub-devices connected at all times through the robust wireless network.
- Low-Power Wireless Protocol – Make connected devices work energy-efficiently, promising longer standby time.
- Smart Alarm – Coordinates with Tapo smart sensors to warn of danger or deter intruders.
- Smart Doorbell – Pair it with Tapo Smart Button to build your smart doorbell system, plus 19 ringtones to choose from.
- Tapo Ecology – Connect with up to 64 smart devices for an immersive and comprehensive smart home experience.
-
TP-Link SMART FILAMENT LED BULB | KL50
$599.00 inc. 9% GSTAdd to cartKasa Filament Smart Bulb, Soft White
- Control from Anywhere – Control your LED filament smart bulb from anywhere with your smartphone using the Kasa Smart app (iOS, Android). Turn your lights on and off from the office, check in and make sure you turned off your kitchen lights, even schedule lights to turn on before you get home.
- Soft White – Kasa Filament Smart Bulb, Soft White’s 2700K temperature works well for any environment. Dim your light to any level of brightness for the right ambiance for a multitude of occasions. The dimmer the bulb, the more you can see the filament design inside.
- Dimmable – Kasa Smart’s LED filament bulb has an expansive dimming range that can be controlled conveniently with the Kasa Smart app. Turn your filament bulb to full brightness for a well-lit vanity or dim it down for a dinner party.
- No Hub Required – The Kasa Filament Smart Bulb, Soft White connects directly to your home’s secure WiFi network. No need for a hub or extra equipment. All you need is your smartphone, the Kasa Smart app and a WiFi connection to start remotely controlling your smart bulb.
- Device Grouping – Use Grouping to combine your smart filament bulb with other Kasa Smart devices for seamless control with a single tap of your smartphone. Put all of your Kasa Smart light bulbs into a single group and dim them all at once for the perfect ambiance.
- Voice Control – Use simple voice commands to control your Kasa Filament Smart Bulb with any Alexa or Google Assistant. Just tell your voice assistant to dim your lights and set the perfect mood for movie night.
- Energy Monitoring – Using the Kasa Smart app, you can check on your LED filament bulb from anywhere to see how much energy is being consumed. Turn it off remotely to stop any consumption.
- Set Schedules – Use your Kasa Smart app to schedule your LED filament light bulb to turn on and off around your daily routine.
- Quick and Easy – Be up and lit with your new smart bulb! It’s as easy as 1-2-3 or A-B-C! Screw your bulb in, follow the simple setup in the Kasa Smart app, name it and get to glowing.
- Grouping – Combine your smart filament bulb with other Kasa Smart devices for seamless control with a single tap on your smartphone.
- Smart Actions – Enable device interconnections and home automation for your Kasa devices. There are three types of Actions that can be created: “Motion Sensing”, “Schedule a Scene” and “Auto-off Timer”.